Original Repower 8channel 60V100A Battery Capacity Charge and Discharge 21700 18650 33140 Tester for Lithium Ion Battery

• Customization: Available
• Transport Package: Wooden Case
• Specification: HD-60V100A8CH
• Model NO.: HD-60V100A8CH
• Trademark: HONGDIAN
• Origin: China
• HS Code: 9030899090
• Production Capacity: 1 Year
• Package Size: 68.60cm * 73.00cm * 147.00cm
• Package Gross Weight: 270.000kg

Product Description

Basic Info.

Model NO.

HD-60V100A-08CH

Origin

Dongguan

HS Code

9030899090

Production Capacity

1 Year

Product Description

 

Product Description

 

 

 

 

Introducing the 60V100A08CH Battery Pack Tester.The device can provide CC mode, CV mode,  Pulse mode, CP mode, CR mode, DCIR mode, and HPPC etc. Through the work step editor, they can be edited to work in a combined work mode and can be quickly switched on the user's requirements.
    Through these basic functions, the test system can carry out battery performance testing, rate charge and discharge testing, capacity testing, cycle life testing, DC internal resistance testing, reliability testing, energy efficiency testing, simulated road condition testing, etc.
    When the same device works with multiple channels, the channels are completely independent of each other; when there is a need to expand the current, the channels can be connected in parallel.

 

 

Function Features:

The charge discharge testing system mainly includes PC software, USB hub, router, aging instrument.  The core is aging instrument, aging 32 bit ARM chip was chosen as main control chip, compared to the traditional microcontroller in the execution speed greatly improved, measuring voltage and current accuracy is higher, through the RS232, network transmission data.

1.  With constant current and constant voltage charging function

2.  With constant current discharge function

3.  Fully meet the battery charge and discharge with mouth and separation requirements, that is, 2 lines (P+ P-) and 3 lines (P+ P- C-).  At the same time, the CH+ P+ P- can be used to protect the negative plate discharge by aging the positive plate charging protection.

4.  By charging and discharging the battery, the charge protection and discharge protection of the battery can be detected.

5.  Charge and discharge the battery, record the charge capacity and discharge capacity of the battery.

6.  Anti reverse protection function, upper and lower voltage set protection, safety discharge current protection (maximum current 20A).

7.  Within 10 machines, through the serial port to connect the PC computer;;  more than 10 sets of equipment, you can use the network connection mode.  In this way, PC computer only need to provide a network port, you can control less than 254 instruments.

8 Aging instrument software system using the classic mature C/S model.

9.  Based on the Windows interface, the use of MYSQ database storage test data, and can export curves.

 

Packaging & Shipping

 

1.Standard exported package: Internal anti-collision protection, external export wooden box packaging.
2.Shipping by Fedex, by air, by sea according to customers' requirements to find the most suitable way,
3.Responsible for the damage during the shipping process will change the damage part for you for free.
4.Supply with the suitable voltage input and source plug according to your country requirements.

AC Input Parameters

Item	Technical Parameters
Wiring Method	AC380V Three-Phase Five-Wire System
Input Power Supply	AC380V
Power Factor	≥99%(full load)
THDi	≤5%(full load)
Maximum feedback efficiency	≥92%(full load)

DC output parameters

Item	Technical Parameters
Voltage range	Charging Voltage: 0V ~ 60V Discharging Voltage: 6V ~ 60V
Voltage Accuracy	±0.05%FS
Voltage Resolution	1mV
Current Range	0 ~ 60A
Current Accuracy	±0.05%FS
Current Resolution	1mA
Current Response Time	10ms(10%FS ~ 90%FS)
Charge/Discharge Conversion Time	20ms(-90%FS ~ 90%FS)
Channel Control Mode	All channels can be independently controlled.
Auxiliary channels	Each channel is equipped with an auxiliary temperature channel.

Step Function Features / Function Features of Operation Steps

Item	Technical Parameters
Minimum Data Logging Time	10ms
Editable Number of Steps	2000
Number of Step Cycles	65535
Step Cycle Nesting	5
Charge and Discharge Modes	Idle, Pause, Constant Current Charge (CC), Constant Voltage Charge (CV), Constant Resistance Charge (CR), Constant Current Constant Voltage Charge (CCCV), Constant Power Charge (CP), Constant Current Discharge (DC), Constant Power Discharge (DP), Constant Resistance Discharge (DR), Direct Current Internal Resistance Test (DCIR)
Termination Criteria	Voltage, Current, Capacity, Energy, Time, Power, Cycle Count, BMS Parameters, Custom Advanced Parameters (Supporting Single or Multiple Logic AND/OR Combinations)
Execution Action Types	Jump, Pause, Protect, Next Step
Importing DBC Files	Supports File Editing, Saving, and Importing
Direct Current Internal Resistance Testing (DCIR)	Supports DCIR (Direct Current Internal Resistance) test steps, hardware real-time calculation, and supports two types of tests: (V1-V2)/(I1-I2) and (V1-V2)/I.
Data Export Methods	Export data in Excel and CSV formats.

Protection Functions

Item	Technical Parameters
AC-Side Protection	AC Grid Voltage Over/Under Voltage Protection, Surge Protection, Anti-Islanding Protection, Over/Under Frequency Protection, Hardware Overtemperature Protection, Self-Test Protection, etc.
DC-Side Protection	Bus Over/Under Voltage Protection, Hardware Overtemperature Protection, Battery Channel Line Reverse Connection Protection, etc.
Battery-Side Comprehensive Protection	Battery pack total voltage upper/lower limit protection, battery cell voltage upper/lower limit protection, battery temperature upper/lower limit protection, battery charge/discharge current upper limit protection, battery capacity upper/lower limit protection, BMS communication loss protection, network disconnection protection, etc.
Ingress Protection (IP) Rating	IP22
Operating Temperature Range	0ºC~ 45ºC
Cooling Method	Forced Air Cooling
Sound Level	≤75dB