Product Description
Battery charging and discharging tester is a special instrument for testing lithium battery pack, lead-acid battery pack, portable mobile power module and other battery packs with full series voltage 30V, 60V, 100V, 120V, using the current advanced test technology theory, and has made a series of breakthroughs in the research and application of new technologies, new components, new materials and new processes. It is designed according to the requirements of relevant national testing and maintenance regulations, and is a special testing instrument for fixed battery performance testing. It has the advantages of large discharge power, small size, light weight and complete functions of data management software of upper computer, which can greatly reduce the workload of daily testing and maintenance of fixed battery.
Product Parameters
AC Input Parameters
| Item |
Technical Parameters |
| Wiring Method |
AC380V Three-Phase Five-Wire System |
| Input Power Supply |
AC380V |
| Power Factor |
≥99%(full load) |
| THDi |
≤5%(full load) |
| Maximum feedback efficiency |
≥92%(full load) |
DC output parameters
| Item |
Technical Parameters |
| Voltage range |
Charging Voltage: 0V ~ 120V Discharging Voltage: 6V ~ 120V |
| Voltage Accuracy |
±0.05%FS |
| Voltage Resolution |
1mV |
| Current Range |
0 ~ 120A |
| Current Accuracy |
±0.05%FS |
| Current Resolution |
1mA |
| Current Response Time |
10ms(10%FS ~ 90%FS) |
| Charge/Discharge Conversion Time |
20ms(-90%FS ~ 90%FS) |
| Channel Control Mode |
All channels can be independently controlled. |
| Auxiliary channels |
Each channel is equipped with an auxiliary temperature channel. |
Step Function Features / Function Features of Operation Steps
| Item |
Technical Parameters |
| Minimum Data Logging Time |
10ms |
| Editable Number of Steps |
2000 |
| Number of Step Cycles |
65535 |
| Step Cycle Nesting |
5 |
| Charge and Discharge Modes |
Idle, Pause, Constant Current Charge (CC), Constant Voltage Charge (CV), Constant Resistance Charge (CR), Constant Current Constant Voltage Charge (CCCV), Constant Power Charge (CP), Constant Current Discharge (DC), Constant Power Discharge (DP), Constant Resistance Discharge (DR), Direct Current Internal Resistance Test (DCIR) |
| Termination Criteria |
Voltage, Current, Capacity, Energy, Time, Power, Cycle Count, BMS Parameters, Custom Advanced Parameters (Supporting Single or Multiple Logic AND/OR Combinations) |
| Execution Action Types |
Jump, Pause, Protect, Next Step |
| Importing DBC Files |
Supports File Editing, Saving, and Importing |
| Direct Current Internal Resistance Testing (DCIR) |
Supports DCIR (Direct Current Internal Resistance) test steps, hardware real-time calculation, and supports two types of tests: (V1-V2)/(I1-I2) and (V1-V2)/I. |
| Data Export Methods |
Export data in Excel and CSV formats. |
Protection Functions
| Item |
Technical Parameters |
| AC-Side Protection |
AC Grid Voltage Over/Under Voltage Protection, Surge Protection, Anti-Islanding Protection, Over/Under Frequency Protection, Hardware Overtemperature Protection, Self-Test Protection, etc. |
| DC-Side Protection |
Bus Over/Under Voltage Protection, Hardware Overtemperature Protection, Battery Channel Line Reverse Connection Protection, etc. |
| Battery-Side Comprehensive Protection |
Battery pack total voltage upper/lower limit protection, battery cell voltage upper/lower limit protection, battery temperature upper/lower limit protection, battery charge/discharge current upper limit protection, battery capacity upper/lower limit protection, BMS communication loss protection, network disconnection protection, etc. |
| Ingress Protection (IP) Rating |
IP22 |
| Operating Temperature Range |
0ºC~ 45ºC |
| Cooling Method |
Forced Air Cooling |
| Sound Level |
≤75dB |
Our Advantages
1.BMS free docking development
2. Accuracy 0.05%
3. Charge and discharge efficiency 92%
4. Avant-garde voltage protection below 60v, without a protection board, our software can predict 7 volts in advance
5. Our chassis appearance design is exquisite, small, in line with the optimal solution to heat dissipation effect, while using Delta fan, IGBT Infineon, the best configuration to ensure heat dissipation effect
Company Profile
Shenzhen Hongda New Energy Co., LTD., founded in 2014, is a supplier of new energy (energy storage) detection equipment and detection technology integrating research and development, production and sales. The company's "Hongdian" brand is committed to the research and development, production and sales of energy storage, power lithium battery pack aging detection equipment.
Over the years, the company's steady growth, office, production environment reached 6000 square meters. The company has energy saving feedback technology, battery management and control, battery system integration and other technologies. The company mainly serves energy storage, power and other lithium PACK manufacturers.
With the development of business, the company's products are constantly enriched, including energy storage, power lithium battery pack aging detection equipment, high voltage, high current, high power battery testing equipment, power battery pack, energy storage power station, mobile base station standby power supply and other new energy projects aging detection equipment.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}