| Customization: | Available |
|---|---|
| After-sales Service: | Life-Time Sale Service |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Introducing our 12V Vehicle Lead-Acid Storage Battery Tester, Car Battery Analyzer for Vehicle Battery Module Pack. This testing system is designed for comprehensive testing, including charge-discharge cycles, capacity detection, and more, for various battery modules and packs. It supports a range of charging modes such as constant current, constant voltage, pulse current, pulse power, DC internal resistance, and various discharging modes including constant current, constant voltage, constant power, pulse current, and pulse power. The system is equipped with multiple protection features, ensuring a secure testing environment.
Comprehensive Testing Capability:
This system is specifically designed to evaluate the performance of vehicle lead-acid storage battery modules, offering comprehensive charge-discharge testing and capacity detection.
Versatile Charging Modes:
Constant current, constant voltage, pulse current, pulse power, DC internal resistance, and more, providing flexibility to meet diverse testing requirements.
Safety Protocols:
The system incorporates robust safety protocols, including protection against short circuits, overload, overvoltage, temperature alarms, capacity protection, and island protection.
Real-time Monitoring:
Real-time monitoring capabilities enable operators to observe critical parameters such as voltage, current, and temperature during the testing process.
Data Recording and Analysis:
Captures and records comprehensive data at each testing cycle, supporting in-depth analysis of the battery pack's behavior.
Applications:
The "12V Vehicle Lead-Acid Storage Battery Tester" is ideal for automotive manufacturers, researchers, and engineers involved in the development, quality assurance, and optimization of battery modules for vehicles.
Operating Instructions:
Battery Pack Connection:
Safely connect the vehicle lead-acid storage battery pack to the designated port on the testing system.
Configure Test Parameters:
Use the user-friendly interface to set the desired test parameters, including charging and discharging rates, voltage limits, and safety thresholds.
Initiate Testing:
Activate the testing process through the system interface. The testing system will execute charge and discharge cycles based on the specified parameters.
Real-time Monitoring:
Monitor real-time data displayed on the interface during the testing process. This allows operators to observe and analyze the behavior of the lead-acid storage battery pack immediately.
Data Analysis:
Review comprehensive test results after each testing cycle, including voltage curves, current characteristics, and temperature changes. Analyze the data to assess the overall performance and health of the lead-acid storage battery pack.
AC Input Parameters
| Item | Technical Parameters |
| Wiring Method | AC380V Three-Phase Five-Wire System |
| Input Power Supply | AC380V |
| Power Factor | ≥99%(full load) |
| THDi | ≤5%(full load) |
| Maximum feedback efficiency | ≥92%(full load) |
| Item | Technical Parameters |
| Voltage range | Charging Voltage: 0V ~ 60V Discharging Voltage: 6V ~ 60V |
| Voltage Accuracy | ±0.05%FS |
| Voltage Resolution | 1mV |
| Current Range | -60A~ 60A |
| Current Accuracy | ±0.05%FS |
| Current Resolution | 1mA |
| Current Response Time | 10ms(10%FS ~ 90%FS) |
| Charge/Discharge Conversion Time | 20ms(-90%FS ~ 90%FS) |
| Channel Control Mode | All channels can be independently controlled. |
| Auxiliary channels | Each channel is equipped with an auxiliary temperature channel. |
| Item | Technical Parameters |
| Minimum Data Logging Time | 10ms |
| Editable Number of Steps | 2000 |
| Number of Step Cycles | 65535 |
| Step Cycle Nesting | 5 |
| Charge and Discharge Modes | Idle, Pause, Constant Current Charge (CC), Constant Voltage Charge (CV), Constant Resistance Charge (CR), Constant Current Constant Voltage Charge (CCCV), Constant Power Charge (CP), Constant Current Discharge (DC), Constant Power Discharge (DP), Constant Resistance Discharge (DR), Direct Current Internal Resistance Test (DCIR) |
| Termination Criteria | Voltage, Current, Capacity, Energy, Time, Power, Cycle Count, BMS Parameters, Custom Advanced Parameters (Supporting Single or Multiple Logic AND/OR Combinations) |
| Execution Action Types | Jump, Pause, Protect, Next Step |
| Importing DBC Files | Supports File Editing, Saving, and Importing |
| Direct Current Internal Resistance Testing (DCIR) | Supports DCIR (Direct Current Internal Resistance) test steps, hardware real-time calculation, and supports two types of tests: (V1-V2)/(I1-I2) and (V1-V2)/I. |
| Data Export Methods | Export data in Excel and CSV formats. |
| Item | Technical Parameters |
| AC-Side Protection | AC Grid Voltage Over/Under Voltage Protection, Surge Protection, Anti-Islanding Protection, Over/Under Frequency Protection, Hardware Overtemperature Protection, Self-Test Protection, etc. |
| DC-Side Protection | Bus Over/Under Voltage Protection, Hardware Overtemperature Protection, Battery Channel Line Reverse Connection Protection, etc. |
| Battery-Side Comprehensive Protection | Battery pack total voltage upper/lower limit protection, battery cell voltage upper/lower limit protection, battery temperature upper/lower limit protection, battery charge/discharge current upper limit protection, battery capacity upper/lower limit protection, BMS communication loss protection, network disconnection protection, etc. |
| Ingress Protection (IP) Rating | IP22 |
| Operating Temperature Range | 0ºC~ 45ºC |
| Cooling Method | Forced Air Cooling |
| Sound Level | ≤75dB |
){kind=link}